COMPREHENSIVE FINISHING PROCESSES
NON-DESTRUCTIVE TESTING (NDT)
- Hardness testing – Aluminum/Stainless Steel
- Conductivity testing – Aluminum/Stainless Steel
- Fluorescent/ Liquid Penetrant Inspection – Aluminum/Stainless Steel/Titanium 16 ft
- Magnetic Particle Inspection – Stainless Steel 6 ft length
- Copper Sulfate Testing
- Salt Spray Testing 3 ft
- Water Immersion Testing 9 ft
ANODIZING
- Boric Anodize – Aluminum 24 ft
- Chromic Anodize – Aluminum 16 ft
- Sulfuric Anodize – Aluminum 24 ft
- Titanium Anodize 8 ft
OTHER CHEMICAL PROCESSES
- Chem film – Aluminum, Titanium for only LMA-PH016 24 ft
- Passivate –Stainless Steel 1.5 ft for smaller parts with an upper cap at 16 ft
- Phosphate Fluoride-Titanium 1.5 ft
- Electropolish – Stainless Steel 9 ft
- Primer (44-GN-72, 44-GN-60, 44-GN-011, 44-GN-098, MIL-PRF-23377)
- Topcoat (MIL-PRF-85285, 2ZZP00001, ACS-PRS-3251, PS 13630, RPS 13.97, HP15-1100, MDM15-1100, BMS 10-60, BMS 10-83, BMS 10-86)
- Adhesive Bond Primer (HMS 16-1278 Type 1, MDM 16-1278 Type 1, BR 127)
- Dry Film Lube (MIL-PRF-46010/AS 5272 Type 1, 2, 3/AS1701 Everlube 620C, Everlube PEC 642, Everlube 9002, Esnalube 382, Aerosol)
- Fuel Tank coating (AMS-C-27725 Type 1, 2, BMS 10-20)
- Sol-Gel (AC-131 BB and AC-131CB)
- Sand Blasting
- Baking
| Base Material | Processes Available |
|---|---|
| Aluminum | Hardness, Conductivity, Etch, Penetrant Inspection, Anodize (Type I Chromic, Type II Sulfuric, Type IV Boric-Sulfuric), Chemical Film, Prime, Paint, Drylube, Teflon, Fuel Tank Coating, Adhesive Coating, Moisture Barrier Coating, Sol-Gel, Etc. |
| Steel | Hardness, Magnetic Inspection, Inconel Etch, Blast, Drylube, Prime, Paint, Bake, Etc. |
| Stainless Steel | Hardness, Magnetic Inspection, Etch, Blast, Penetrant Inspection, Passivation, Electro-Polish, Sol-Gel, Drylube, Prime, Paint, Bake, Etc. |
| Titanium | Etch, Blast, Penetrant Inspection, Titanium Anodize, Chemical Film, Etc. |